The adjustable vacuum block moulding machine has a developed performance about water content rate and factory area requirement. You can manufacture specific size of block during 2m-6m what you want. Welcome to watch production testing video of 2m block below. This machine has been running wihtin South Africa, South-east Asia already.
| Machine type | Automatic Block moulding machine | ||||||
| Item | Unit | Model | Model | Model | Model | Model | |
| PB2000VS | PB3000VS | PB4000VS | PB6000VS | PB8000VS | |||
| Mould cavity Size | Mm | 2040*1020*1030 | 3060*1240*1030 | 4080*1240*1030 | 6100*1240*1030 | 8140*1240*1030 | |
| Block Size | Mm | 2000*1200*1000 | 3000*1200*1000 | 4000*1200*1000 | 6000*1200*1000 | 8000*1200*1000 | |
| Steam | Entry | inch(mm) | 4″(DN100) | 5″(DN125) | 8″(DN200) | 8″(DN200) | 8″(DN200) |
| Consumption | kg/cycle | 25~45 | 45~65 | 60~85 | 95~120 | 115~160 | |
| Pressure | Mpa | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | |
| Compressed Air | Entry | inch(mm) | 2″(DN50) | 2″(DN50) | 3″(DN80) | 3″(DN80) | 3″(DN80) |
| Consumption | m3/cycle | 1.5~2 | 1.5~2.5 | 1.8~2.5 | 2~3 | 2.5~3 | |
| Pressure | Mpa | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | |
| Vacuum cooling water | Entry | inch(mm) | 1.5″(DN40) | 1.5″(DN40) | 1.5″(DN40) | 1.5″(DN40) | 1.5″(DN40) |
| Consumption | m3/cycle | 0.4 | 0.6 | 0.8 | 1.0 | 2.0 | |
| Pressure | Mpa | 0.2~0.4 | 0.2~0.4 | 0.2~0.4 | 0.2~0.4 | 0.2~0.4 | |
| Drainage | vacuum vent | inch(mm) | 4″(DN100) | 5″(DN125) | 5″(DN125) | 5″(DN125) | 5″(DN125) |
| steam vent | inch(mm) | 4″(DN100) | 5″(DN125) | 6″(DN150) | 8″(DN200) | 8″(DN200) | |
| air cooling vent | inch(mm) | 4″(DN100) | 5″(DN125) | 6″(DN150) | 8″(DN200) | 8″(DN200) | |
| Capacity 15kg/m3 | m3/cycle | 4 | 6 | 7 | 8 | 8 | |
| Connected load/Power | kw | 19.75 | 23.75 | 24.5 | 32.25 | 40.25 | |
| Overall dimension(L*W*H) | mm | 5700*4000*2800 | 7200*4500*3000 | 11000*4500*3000 | 12600*4500*3100 | 15700*4600*3500 | |
| Weight | kg | 5000 | 6500 | 10000 | 14000 | 17000 | |
